|
Bearings and Rollers
This page features: AG Bearings and
Wear Parts
< Previous 1, 2,
3, 4,
5, 6 Back
>
Return to Bearings and Rollers Index Page |
|
We Welcome
Credit Cards
1-800-222-6376
Ask For Our
Catalog |
|
| The
auger in the liquid manure spreader shown uses a center support which is
immersed in the liquid manure. A POBCO-B two piece sleeve bearing was selected
for use in this center support because of its ability to afford superior
service under these corrosive conditions. |
|
|
|
The portable
grinder mixer unit shown below is furnished with a 6 foot folding discharge
auger extension. A POBCO metal mounted pillow block was chosen to retain the
auger in the extension housing because of its lower cost and ability to perform
well in a feed dust environment.
|
|
| |
|
| A POBCO
TriMount 2-bolt side flange self aligning bearing is used in the trough end
shown to the left to provide bearing support of screw conveyor
ends. |
|
| The
fertilizer spreader utilizes a POBCO TriMount pillow block to support the main
shaft. The two piece feature of the housing and the spherical bearing (circled)
saves the user much time and expense, because the bearing can be replaced
without being slid to the end of the shaft. |
|
 |
|
|
|
|
|
Return
Home | Return to Bearings and Rollers Index
Page | Top of Page
|
|
Pobco Plastics · 99 Hope Avenue
· Worcester, MA, USA 01603-2298
1-800-222-6376 (in North America)
· (508) 791-6376
Fax: (508) 791-3247 · EMAIL
pobco@pobcoplastics.com |
|
