POBCO Bearing and Roller Accessories from Pobco Plastics

	Tel: 1-800-222-6376 (in North America) or (508) 791-6376 Fax: (508) 791-3247
	Home \| Company Profile \| Capabilities \| Policies \| Site Map \| E-mail

Bearings and Rollers
This page features: Roller Bearings (Overview)
< Previous 1, 2, 3, 4, 5, 6, 7,8, Return to Bearings and Rollers Index Page

We Welcome
Credit Cards

1-800-222-6376
Ask For Our Catalog

·	Roller Bearings
·	Bearing & Roller Accessories
·	Dual Durometer Rollers
·	Urethane Rollers
·	Roller Types
·	Roller Specification Sheet
·	FEP Roll Covers
·	Bead Roller Rails
·	Conveyor Rollers Standard Selection

POBCO Hex Shaft adapters slide over the hex shaft to allow the inside diameter of the roller to rotate freely on the outside diameter of the adapter. POBCO spring-loaded rollers with hex shafts use these adapters. SS adapters have a 1/8" FT dimension.

	Standard in 304 S.S. Available in 316 S.S. (Special Order)(Matching stainless steel bolts are available.)
POBCO Stud Shafts thru-bolts to the frame allowing the use of blind-bore or other roll end bearings. *1/8 dia. hole for use with spanner wrench. Prevents stub shaft from spinning down during installation.


Normally designed to press fit into molded plastic roll end bearings, these inserts have a blind inside diameter so that the inside of the roller is completely sealed off. They normally are mounted on stub shafts.

Return Home | Return to Bearings and Rollers Index Page | Top of Page

Conveyor Components

Pobco Plastics · 99 Hope Avenue · Worcester, MA, USA 01603-2298
1-800-222-6376 (in North America) · (508) 791-6376
Fax: (508) 791-3247 · EMAIL pobco@pobcoplastics.com