POBCO Sleeve and Flange Bearings from Pobco Plastics

Pobco Plastics

Pobco Plastics, Inc. Manufacturers of Plastic and Lube-Filled Hardwood Conveyor Components, Wood Bearings and Plastic Bearings
Tel: 1-800-222-6376 (in North America) or (508) 791-6376 Fax: (508) 791-3247
  Home | Company Profile | Capabilities | Policies | Site Map | E-mail  
 

 
 

Bearings and Rollers
This page features: Sleeve and Flange Bearings, Thrust Washers
< Previous 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 Next >
 Return to Bearings and Rollers Index Page

POBCO Sleeve and Flange Bearings

We Welcome
Credit Cards



1-800-222-6376
Ask For Our Catalog

Bearings and Rollers Navigation Menu
· Sleeve & Flange Bearings
· Molded Nylon-MD Sleeve & Flange Bearings
· Light Duty Molded Nylon-MD Slit Flange Bearings
· High Temp Sleeve & Flange Bearings
· Standard Roll End Bearings
· Light-Duty Roll End Bearings
· V-Belt Roll End Bearings
· Blind-Bore Roll End Bearings
· Free-Draining Roll End Bearings
· Conical Roll End Bearings
· Delrin® Roll End Bearings For Tubing
· Delrin® Roll End Bearings For Standard Pipe
· ABS Housings With Bearing Inserts
· Molded Nylon Roll End Bearings
· Delrin® Roll End Ball Bearings
· Self Sealing Spring Loaded Ball Bearing
· Heavy Duty ABEC1-Precision Roll End Bearings
 

Available in POBCO-B Wood Bearing Material and a variety of POBCO Plastics including POBCO Ultra-D (UHMWPE), POBCO Plus (food grade fluid lube-filled UHMWPE) POBCO NYLONS, POBCO ACETAL and POBCO RULONS®

Specify dimensions, shaft size and operating conditions. Two piece bearings are available.

Design Guidelines
When possible, the length to inside diameter ratio should be from 1:1 to 3:1. In general, the wall thickness should be approximately 15% of the shaft diameter. The choice of bearing material is also a determining factor in bearing design.

 Flange and Sleeve Bearings

Some Common Sizes listed below.
Many other Sizes Available, Please Inquire.

Sleeve Bearings
Non-cataloged sizes and shapes, including sizes
larger than thoses listed are available.

  

Flange Bearings
Flange Diameters and Flange Thickness will vary.
Contact Sales Department for Details.
*Please specify Bearing Material
**See Bearing Materials to complete Part Number.

POBCO Thrust Washers

POBCO thrust washers are furnished to customer specifications. Normally, the outside diameter is twice the shaft diameter. Non-cataloged thrust washers, including sizes larger than those listed, are available. Required dimensions are indicated in the drawing.

Return Home | Return to Bearings and Rollers Index Page | Top of Page

Conveyor Components

 Pobco Plastics · 99 Hope Avenue · Worcester, MA, USA 01603-2298
1-800-222-6376 (in North America) · (508) 791-6376
Fax: (508) 791-3247 · EMAIL pobco@pobcoplastics.com